Lenovo A690 stock rom to unbrick your phone

Nurul

Thursday, November 6, 2014

Hi,

Atlast Im finally done uploading the firmware / stock rom for A3300-GV ^_^

The stock for this tablet is not mine, I found this firmware/stock in a lenovo forum, so thank you for them for uploading the firmware/stock rom. As what I have read, the firmware is version 4.4.2 which is the KitKat version. The Stock ROM/firmware is fully working. The tablet has a MTK6582 cpu and I suggest that use the latest flash tool for this tablet.

Firmware Here -->Lenovo A3300GV
Firmware Part 2 --> Part 2

VCOM Driver -->VCOM Manual

SPFlashTool --> LatestVersion

"If you can't extract it with winRAR, use 7zip to extract the firmware because I compressed the file in 7zip"

"Extract the files to your desired folder" See picture below"
"If you encounter error in flashtool, use different version of it."

Installing Driver

1. This is the first time that you will connect your phone and it will search for the correct driver.

2. Check include this location ... ... and click on browse. Look for USB VCOM Driver and Click on 2K_XP_COM folder if you are using Windows XP or Win7 for Windows 7 and then press OK when you are done picking the right folder for the driver.

3. If the driver is successfully installed MediaTek DA USB VCOM will appear in the New Hardware Wizard.

1. Launch FlashTool

2. Click on Scatter-Loading, and load your scatter file. (see example below with loaded file in Flash Tool

3. After you load the file, press F9 or Press Download to Flash your Phone.

4. If Download is not possible, you can press Firmware Upgrade.

5. After you press Download or Firmware Upgrade, power off your tablet and connect your tablet to the PC. Press Volume Down or Volume Up while connecting to PC or press the buttons simultaneously.

"Hard reset your tablet after flashing"

I hope this tutorial help you. Please drop a comment if something is not clear to you.